Expert Answers about Forest River Flagstaff Camper
- Storage Cover For a 2015 Forest River Flagstaff Hard Side A-Frame Style Camper
- The Adco SFS AquaShed RV Cover # 290-12293 is designed to fit either a 12' or 14' box like that which is used on the 2015 Forest River Flagstaff Hard Side A-Frame Campers. This cover is 14' long by 7' 1" wide and 4-1/2' tall. If your actual box is larger than this due to a storage area please let me know and I can help you find the correct cover.
view full answer... - Determining a Lift Kit for a 2014 Flagstaff MAC 228D
- From the information I could find on your 2014 Flagstaff MAC 228D it looks like the Torflex Lift Kit # K71-707-01 is most likely the correct option. From what I could find, it looks like Dexter Torflex axles came standard on high wall and hard side models.
I would recommend checking your axle for the axle tag to confirm that you have the #10 Torflex axle because the Torflex Lift Kit # K71-707-01 only works with Dexter #10 Torflex axles. If you are unable to locate what axle you have, you...
view full answer... - Changing Tire Size on 2008 Forest River Flagstaff Pop-Up Camper 176ST
- Changing the tire size on an RV like your Forest River Flagstaff pop-up model 176ST is possible as long as you have the clearance needed for the wider/taller tire size.
The general rule for minimum sidewall clearance at the frame is 3/4-inch; and the rule for vertical clearance is no less than 3-inches so that normal up-and-down travel of the suspension does not cause tire tread contact with the interior of the wheel well.
The article I linked for you lists many trailer tire sizes, with...
view full answer... - Availability of Dexter 3,500 lb Axle Brake Kit for Trailer that is Self Adjusting
- Dexter does have a version of the # 23-26-27 that you referenced that is self adjusting with the part # 23-468-469 which is a 10 inch by 2-1/4 inch set for 3,500 lb axles.
view full answer... - How to Determine if Combination RV Reading Light with Fan Will Work in Camper
- The Combination RV Reading Light with Fan # 328-001-103 isn't a fit for any specific trailer; in order to determine if it will work for you, your camper simply needs to have a 1/4" headphone-style jack/accessory outlet for the light to plug into. This is pretty common on campers so it is likely you have this, though unfortunately we don't have any way of knowing exactly what type of plugs are in any given camper.
I have added a link below to a video review for you to check out as well...
view full answer... - Trailer Hitch for Pop-Up Camper to Carry Bike Rack
- There may be a trailer hitch you can use on your 2006 Forest River Flagstaff 228d but you would need to mount it to your trailer's frame.
The Curt Adjustable Width Trailer Hitch Receiver # 13703 will fit box frames, C-channel frames, or I-beam frames that are between 22" and 72" wide, so if your '06 Forest River has that this hitch will work for you.
Also please keep in mind that your bike rack does need to be rated for use behind a trailer. For this I recommend checking out the Swagman...
view full answer... - How to Find Bearings & Grease Seal For 2008 Forest River Flagstaff 625D
- I can tell you how to find the correct grease seal and bearings for your 2008 Forest River Flagstaff 625D, but don't have any way of knowing exactly what is on your trailer. So in order to find the correct ones you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.
If you are unable to find them, you need to use a digital caliper and measure your spindle to the...
view full answer... - Determining Which Torflex Lift Kit Fits A 1998 Forest River Flagstaff Trailer With Tandem Axles
- We may have a Torflex Lift Kit for your 1998 Forest River Flagstaff trailer with tandem axles, but I will need to know the information of the axle tag to confirm which axle you have.
With that said none of the Torflex kits available have a 6" bolt pattern, with the smallest mounting bolt pattern being the # K71-723-01 with a 7-3/4" bolt pattern.
If you can take a picture of the axle tag and send it over I would be happy to identify which kit fits your axle.
view full answer... - How to Determine the Correct Trim for Rubber Seals Around an RV Window
- We have a variety of rubber seals available for RV's. Unfortunately, this is not a part that we can determine the correct product from your RV information. Your best course of action will be to take measurements of your current seal and compare its shape to the options that we have on our site.
For instance, the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding # SR78FR measures 7/8" wide x 3/8" tall and fits in a 3/4" track. I have included a photo showing the shape of this...
view full answer... - Correct Replacement for Dexter Electric Trailer Brake Assemblies 023-476-00
- The Dexter Trailer Brake Assemblies 023-476-00 will cross-reference to our Dexter Electric Trailer Brake Kit part # K23-472-473-00.
view full answer... - What Size Ball Shank Does The Curt # C69JR and Reese # RE44FR Weight Distribution Use?
- Both the Curt TruTrack 2P Weight Distribution System # C69JR and Reese Pro Round Bar Weight Distribution # RE44FR are going to use a 2-5/16" Ball # C40030 with a 1-1/4" shank. You will want to use the 2" Ball # A-90 to switch to a 2" hitch ball.
You are able to back up with the Reese # RE44FR.
view full answer... - Recommended Power Converter Replacement for Magnetek 6332 that Works w/ Lithium Batteries
- I have a couple of options for you but the only replacement for your Magnetek 6332 converter item # PD4635V is for lead acid, AGM, and gel batteries. They don't make a replacement converter that works with lithium batteries.
Instead you can use the Progressive Dynamics 9100 Inteli-Power Lithium Converter item # PD9130LV. This does not come with the housing but will still work for you.
If you don't like that option then the only other solution is to replace the entire power center with...
view full answer...
Go To Results